Deployment From Hp Sum; Executing Hp Sum - HP Integrity rx2800 - i2 User Manual

HP SUM Delivered with
version
•
•
For ProLiant Workstation Blades:
•
•
4.0.0.64 •
4.0.1 •
•
4.0.2 •
4.1.0 •
•

Deployment from HP SUM

The following sections discuss deployment from HP SUM.

Executing HP SUM

HP SUM provides three modes of execution for users:
•
GUI—For firmware and software deployments
•
Express—For software deployments only (local host only)
•
Scripted—For firmware and software deployments running silently
HP SUM enables you to deploy to both local and remote deployments. HP SUM can run in both standard
Windows® and Linux operating systems in online mode and in offline mode (available on HP Smart
Update Firmware DVD) through special boot environments based on Linux boot kernels as long as the
prerequisites are met.
Use the following table to determine the correct execution mode for the server use case.
HP ProLiant Support Pack for Linux
8.40
HP Smart Update Firmware DVD 9.0
HP Workstation Support Pack for
Windows for HP WS460c G6 Blade
HP Smart Update Firmware DVD 9.0
(offline only)
HP Integrity Support Pack for
Windows® on Itanium®-based systems
HP ProLiant Support Pack for Windows
8.50
HP ProLiant Support Pack for Linux
8.50
HP Smart Update Firmware DVD 9.10
HP ProLiant Support Pack for Windows
8.60
HP ProLiant Support Pack for Linux
8.60
Support and limitations
•
Support for Integrity Support Pack for
Windows® 7.00
•
No support for BL860c/BL870c/BL890c i2
Servers firmware deployment
•
No support to download the latest
components available from ftp.hp.com
through HP SUM GUI and command line
options
•
No support for BL860c/BL870c/BL890c i2
Servers firmware or HP Integrity Support
Pack
•
No support for BL860c/BL870c/BL890c i2
Servers firmware or HP Integrity Support
Pack
•
No support for BL860c/BL870c/BL890c i2
Servers firmware or HP Integrity Support
Pack
Introduction 12