Lucent Technologies MERLIN LEGEND System Manager's Manual page 291

Communications system release 5.0
Hide thumbs Also See for MERLIN LEGEND:
Table of Contents

Advertisement

MERLIN LEGEND Communications System Release 5.0
System Manager's Guide 555-650-118
6
Managing the System
Revising Disallowed Lists
routing calls. Star codes are provided by the central office (CO) to allow the use of
special features (for example, in many areas *70 turns off a call-waiting feature
provided by the central office). In Release 3.0 and earlier systems, the star code
digits were processed as dialed digits by ARS, Allowed Lists, Disallowed Lists,
and calling restrictions. Therefore, the actual called party number was not
properly processed when a star code was entered.
Release 3.1 and later systems permit system managers to include star codes in
Allowed and Disallowed Lists. If a star code is allowed, the digits following the star
code are checked normally by Allowed/Disallowed Lists, calling restrictions, and
ARS.
The MERLIN LEGEND Communications System Release 3.1 and later observes
these Bellcore standards for star codes:
Only 2- or 3-digit star codes are recognized. Two-digit star codes must
begin with 1, 4, 5, 6, 7, 8 or 9. Three-digit star codes must begin with a 2 or
a 3.
The star code or codes must come at the beginning of the string of digits
dialed, not at the end or in the middle. Multiple leading star codes are
allowed for dialing, but not in Allowed/Disallowed Lists. For example,
*67*705551212 is recognized correctly, but in 5551212*67*705553131 the
stars are ignored.
To prevent rotary phone users from using all star codes, include a separate
Disallowed List entry, 11 . To disallow specific codes, create separate
entries where 11 is substituted for the *, for example, 1167 .
Beginning with Release 3.1, a default Disallowed List (number 7) is provided with
the system. This Disallowed List is automatically assigned to both generic and
integrated VMI ports used by voice messaging systems. It includes the following
entries, which are often used for toll fraud:
0, to prevent international calls
10, to prevent access to long-distance service providers
1809, to prevent unauthorized international calls routed through the
Dominican Republic
1700, to prevent unauthorized toll calls with a "700" area code
1900, to prevent unauthorized toll calls with a "900" area code
976, to prevent local toll calls to numbers with "976" local access codes
1www976, where "w" stands for a wildcard entry, to prevent long-distance
calls to numbers with "976" local access codes
11, to prevent the use of star codes at rotary telephones
*, to prevent the use of star codes at multiline telephones
Issue 1
June 1997
Page 6-73

Advertisement

Table of Contents
loading

Table of Contents