Lucent Technologies MERLIN LEGEND System Manager's Manual page 332

MERLIN LEGEND Communications System Release 5.0
System Manager's Guide 555-650-118
7 Learning More
System Guides Information Finder
Table 7–3. Continued
To learn about. . .
Lines and Trunks
Adding new lines or trunks to the system
Changing the settings on lines and trunks
Changing the channels for T1 DS1 service
Changing settings for PRI or NI-1 BRI
service
Changing the way malfunctioning trunks are
taken out of service
Setting up Remote Access trunks
Changing Automatic Route Selection (ARS)
Facility Restriction Levels for lines/trunks
Changing settings for DID or tie lines
Assigning trunks to pools
For more information about training, contact your Lucent Technologies
representative.
Check this guide. . .
Consult your Lucent Technologies
representative and System Programming ,
Chapter 4.
Consult your Lucent Technologies
representative and System Programming ,
Chapter 4.
Consult your Lucent
Technologiesrepresentative and System
Programming , Chapter 4.
Consult your Lucent Technologies
representative and network service
provider.
Consult your Lucent Technologies
representative and System Programming,
Chapter 4.
Feature Reference . See "Automatic
Maintenance Busy."
Feature Reference . See "Remote Access."
System Programming , Chapter 4
System Programming , Chapter 4
Feature Reference . See "Automatic Route
Selection."
Consult your Lucent Technologies
representative.
System Programming , Chapter 4
Feature Reference . See "Pools."
Issue 1
June 1997
Page 7-20