Introduction To System Programming; Typefaces Used In Summary Programming Procedures - Lucent Technologies MERLIN LEGEND 6 System Manager's Manual

MERLIN LEGEND Communications System Release 6.0
System Manager's Guide 555-660-118
6 Managing the System

Introduction to System Programming

The summary programming procedures describe steps for both the console and
the PC. You should use the appropriate procedure. The format is as follows:
Console Procedure
PC Procedure
The arrows separate each step.
the step involves.
Table 6–1.
Typeface
More

Dial ext. no.
Ã
U
I
+
Introduction to System Programming
The system offers menu-driven software for performing the tasks described in this
chapter.
This section provides an overview of the types of programming, the programming
screens, and the appropriate idle state that the system must be in to perform
certain tasks.
Types of Programming
The following are the three types of programming available for the system:
System Programming. Allows you, as the system manager, to program
features that affect all or most system users. Perform system programming
using one of the following:
— System Programming Console. An MLX-20L telephone connected to
More
 Ã Æ
no.
I
+ Type label

Typefaces Used in Summary Programming Procedures

Meaning
Select this option by pressing this imprinted button on the console.
Select this menu option using an unlabeled display button.
Enter this information.
Press this key on the PC.
Press this function key on the PC.
On the PC, while holding down the first key, press the second key.
one of the first five jacks on the first MLX module in the control unit.
Drop Enter label
È Ç Ç
Type calling group ext. no.
Table 6–1 shows the typefaces that indicate what
6
6
Issue 1
February 1998
Page 6-5
Dial calling group ext.
 U