Exiting System Programming - Lucent Technologies MERLIN LEGEND System Manager's Manual

MERLIN LEGEND Communications System Release 5.0
System Manager's Guide 555-650-118
6 Managing the System
Programming from the Console
The middle column, "Additional Information," contains explanatory
information if necessary.
The System Programming menu in Step
Menu'' on page
Programming Procedures'' on page
Console/Display Instructions
Display the Menu Mode (main menu) screen.

Select System Programming.

MENU MODE: Select Feature
Press HOME to Exit
Directory
Messages
Posted Msg
Alarm Clock
Timer
Display the System Programming menu.

System Set-up:
Review and Exit
Size: Large
Type: xxxx
Operator:
xxxx xxxx
Exit
Make a selection.

System Programming:
Make a selection
System
SysRenumber
Operator
LinesTrunks
Exit

Exiting System Programming

Use the information in
main menu (Menu Mode screen), or the Home screen.
6-8. For information about the procedure format, see
Sys Program
Maintenance
Ext Program
xxxx xxxx
xxxx xxxx
>
Extensions
Options
Tables
AuxEquip
NightSrvce
Table 6–5
4 is described in
6-3.
Additional Information
Press the Menu button.
If the programming console is a QCC,
does not appear on this screen.
Program
On the System Set-up screen, system
information appears in place of
the s.
x
= Large
Size
= Key, Hybrid/PBX, or Behind
Type
Switch
= Position extension numbers
Operator
Select
Exit
Press the button or function key next to
your selection.
6
to return to the System Programming menu, the
Issue 1
June 1997
Page 6-17
''System Programming
''Using the
Ext