Lucent Technologies MERLIN LEGEND System Manager's Manual page 254

MERLIN LEGEND Communications System Release 5.0
System Manager's Guide 555-650-118
6 Managing the System
Using Reports
NOTES:
1. If you select the
2. If you select a report for which there is no information, the report
3. Print reports if you cannot back up your system programming
4. If your system must handle more than 100 calls per hour, do not print
5. If you are printing from the console, your printer must be connected to
To print system programming reports, use one of the following procedures:
Console Procedures
PC Procedures
All
You may want to schedule use of the printer during off-peak hours.
header still prints.
information.
reports during regular hours.
the SMDR port. If you are programming on a PC with SPM, you have
the following choices:
Print reports on the SMDR printer (if available).
Print reports on the PC printer.
Save reports (on hard disk or floppy).
View reports (browse).
To print trunk information:
More
Print
To print extension information:
More
Print
no.
Enter
To print all other reports:
More
Print
To print trunk information:
… 
To print extension information:
… 
To print all other reports:
… 
To save report on disk:
… 
from below console simulation screen
To view report:
+
5 $
option, the reports take several minutes to print.
Trunk Info
More
Ext Info
Exit
Select report
Select trunk type
"
Type ext. no.
… 
Select report
Select report
June 1997
Page 6-36
Select trunk type
Dial ext.
Exit
!

!
select
GOTO FLOPPY


Issue 1
Exit
!