Lucent Technologies MERLIN LEGEND System Manager's Manual page 303

MERLIN LEGEND Communications System Release 5.0
System Manager's Guide 555-650-118
6 Managing the System
Changing Posted Message Labels
Planning Guidelines
Messages 2 through 20 can be changed through programming. Message 1, DO
NOT DISTURB, cannot be changed.
Valid Entries
1 to 20
Each posted message can have a maximum of 16 characters.
Labels can contain capital letters, numbers, and eight types of characters:
ampersands (&), dashes (-), spaces, periods (.), commas (,), apostrophes ('),
stars (*), and pound signs (#).
Task List: Changing Posted Message Labels
o
Obtain Form 10a, Label Form: Posted Messages.
o
If necessary, read "Labeling" in the Feature Reference for detailed
information about this feature.
o
Plan changes using the planning guidelines above; record the new values
on Form 10a.
o
Open the System Programming menu from the console or a PC with SPM.
o
Program the change(s), following the instructions for "Posted Message" in
the "Labeling" section of System Programming , Chapter 3, or the summary
programming instructions below.
o
When you have finished, file Form 10a with the rest of the planning forms.
Programming Instructions
Console Procedure
PC Procedure
More
Labeling PostMessage
Drop Enter message
Enter
Type message no.
…  
Type message
"
6
6
6
Dial message no.
Enter Exit

! !
Issue 1
June 1997
Page 6-85
Exit
+
3