Revising Night Service With Coverage Control - Lucent Technologies MERLIN LEGEND System Manager's Manual

MERLIN LEGEND Communications System Release 5.0
System Manager's Guide 555-650-118
6 Managing the System

Revising Night Service with Coverage Control

Programming Instructions
Console Procedures
PC Procedures
Revising Night Service with
Coverage Control
In Release 4.1 and later systems, system managers can coordinate the status of
Coverage VMS Off buttons programmed at extensions with Night Service
operation.
With this feature enabled (the factory setting is disabled), the following occurs:
When Night Service is turned on, all Coverage VMS Off buttons are
deactivated; that is, the programmed voice-messaging system calling
group takes calls.
To assign a calling group to a Night Service group:
NightSrvce GroupAssign
ext. no. of Night Service operator
group no.
Enter
To assign an extension to a Night Service group:
NightSrvce GroupAssign
no. of Night Service operator
member
Enter Exit
To assign a line to a Night Service group (Release 4.1
and later systems only):
NightSrvce GroupAssign
Night Service operator
(801–880)
 !
To assign a calling group to a Night Service group:
Type ext. no. of Night Service
  
operator Type calling group no.

!
To assign an extension to a Night Service group:
Type ext. no. of Night Service
  
operator Type ext. no. of member

! !
To assign a line to a Night Service group (Release 4.1
and later systems only):
Type ext. no. of Night Service
  
operator Type outside line no. (801–880)

 ! !
6
Calling Group
Enter
Exit Exit
Extensions
Dial ext. no. of
Enter
Exit
Dial ext. no. of
Lines
Dial outside line no.

!
6
Issue 1
June 1997
Page 6-80
Dial
Dial calling
Dial ext.
 !