Lucent Technologies MERLIN LEGEND System Manager's Manual page 240

MERLIN LEGEND Communications System Release 5.0
System Manager's Guide 555-650-118
6 Managing the System
Programming from a PC with SPM
To access SPM through a local or remote modem connection, follow the steps
below. For more information about the procedure format, see
Programming Procedures'' on page
Console/Display Instructions
Set up the appropriate physical connections between the PC and the control

unit as described in Chapter 2 of System Programming.
Type and press
spm

Welcome to SPM
The MERLIN LEGEND
System Programming
& Maintenance Utility
Please press any key
to continue
Version X.XX
Press any key to display a blank screen on which you can enter modem com-

mands. (You may have to press the key several times.)
Make a data connection to the modem of the control unit.

See Chapter 2, "Programming with SPM," in System Programming . When the
connection is made, the password prompt appears, as shown in Step 5.
Type the remote access password to display the SPM Main Menu shown in

Step 6.
Enter Password:
The password does not display when you type it.
To reach the System Programming menu, select System Programming by

pressing

SPM Main Menu
Menu: Select Function

Sys Prog

Backup

Boards
Print Opts
!
Monitor
to display the SPM Welcome screen shown below.
P
.
"
Maintenance
#
Restore
$
Pass-Thru
Password %

Language
6-3.
Additional Information
= current version of SPM
X.XX
Issue 1
June 1997
Page 6-22
''Using the