Installation Procedures - AT&T Call Management System Installation And Programming Manual

For merlin legend communications system
Hide thumbs Also See for Call Management System:
Table of Contents

Advertisement

Installing the Hardware

Installation Procedures

IMPORTANT:
Read this section carefully before beginning to install the equipment.
Gather all equipment, tools, and source documents before starting.
Installing CMS for the MERLIN LEGEND system includes configuring the
MERLIN LEGEND system for CMS, assembling and connecting the CMS PC
and phones, and installing optional equipment.
This section first lists the general procedures in the order you should perform
them (Table 2-3). Each procedure includes a source for detailed assembly
and installation instructions. Most of these sources are the documents that
accompany the equipment. Refer to these instructions for proper installation.
For equipment that has no assembly documentation or requires special con-
nection instructions for CMS, the instructions appear later in this section.
NOTE:
If this installation is an upgrade from MERLIN II CMS, complete only the steps
marked with an asterisk (*). Refer to Appendix B.
Follow these steps in order.
Table 2-3. General Installation Steps
Step
1.*
Install the MERLIN LEGEND control unit, if necessary.
Source: MERLIN LEGEND Communications System Installation,
Programming, and Maintenance.
Install Dedicated Automated Attendant (if applicable).
2.
Source: Installation guide for the unit and page 2-16 of this guide.
Installation Procedures
2-6
Description and Source

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Call Management System and is the answer not in the manual?

Table of Contents