Block Renumbering - AT&T Call Management System Installation And Programming Manual

Programming the MERLIN LEGEND System for CMS
NOTE:
If Form 2a does not show that any extensions are to be renumbered, skip the
remainder of this section and continue with "Transfer Return Time." Refer to
the "Renumber To" column of the form to determine if extensions are to be
renumbered.

Block Renumbering

If Form 2a shows the CMS extensions to be renumbered as a consecutive
range, or block, renumber the whole block at once by completing the steps
below. Refer to Form 2a for the new extension numbers.
IMPORTANT
In steps 2–4 below, enter 2-digit, 3-digit, or 4-digit extension numbers
depending on the numbering scheme selected in the previous pro-
cedure. For example, use 4-digit extensions if you selected Set Up
Space.
Step
1. Display Block Renumber
Extensions Entry screen
2. Enter the 2-digit, 3-digit,
or 4-digit extension
number for the first
extension in the block.
Enter the 2-digit, 3-digit,
3.
or 4-digit extension
number for the last
extension in the block.
Setting Basic System Operating Conditions
1-6
MLX-20L
SysRenumber
Block
Extensions
Dial extension
Enter
Dial extension
Enter
PC
[F2]
[F3]
[F2]
Type extension
[F10]
Type extension
[F10]