System Renumbering - AT&T Call Management System Installation And Programming Manual

Programming the MERLIN LEGEND System for CMS
Specify key mode
2.
or
hybrid/PBX mode
and save entry
The system will restart

System Renumbering

System Renumbering includes selecting the type of numbering scheme (2-
digit, 3-digit, or 4-digit set-up extension numbers) and changing extension
numbers from their factory-set values. Selecting a numbering scheme is
required; renumbering extensions is optional. Refer to the front of Form 2a,
System Numbering—Station Jacks. The factory setting is 2-digit extension
numbering and the factory set extensions numbers are listed on the form.
Step
1. Display Default Number-
ing screen
2. Specify System Number-
ing Plan
— For 2-digit
— For 3-digit
— For 4-digit
3. Exit to System Program-
ming
Key
or
Hybrid/PBX
Enter
MLX-20L
Sys Renumber
Default Numbering
2-Digit
3-Digit
Set Up Space
Exit
To exit from Set
or [F5] twice more
Exit
Setting Basic System Operating Conditions
[F1]
or
[F2]
[F10]
PC
[F2]
[F1]
[F1]
[F2]
[F3]
[F5]
Up Space, press
1-5