Telephone Programming; Backups - AT&T Call Management System Installation And Programming Manual

Programming the MERLIN LEGEND System for CMS
Step
1. Display system program-
ming menu
In the system programming instructions that follow, we assume that you have
entered programming mode and are starting from the system programming
menu. Refer to the above procedure if necessary.
NOTE:
Certain programming selections cause the system to restart automatically.
To continue programming after a system restart, enter the programming
mode as described above.
Some of the items to be programmed may already have the correct settings.
On the PC or MLX-20L display, the current setting is highlighted with reverse
video. If an item is set correctly, you do not need to reset it. Simply exit that
programming selection and continue with another one. For a list of the fac-
tory settings, see Appendix C.

Telephone Programming

You can complete telephone programming either at an individual phone or
from the system programming console or PC using centralized telephone pro-
gramming. For most telephone programming, we recommend that you pro-
gram the telephone directly to ensure proper button assignment and to test
the programming immediately.

Backups

If you are adding CMS to an existing system, backup the MERLIN LEGEND
files using SPM before you start. If an error occurs during programming, you
MLX-20L
Menu
Sysprog
Exit
PC
Type SPM
[F1]
[F5]
Before You Begin
1-3