Merlin Legend Hardware; Cms Hardware-Required - AT&T Call Management System Installation And Programming Manual

Installing the Hardware

MERLIN LEGEND Hardware

The MERLIN LEGEND system supports a variety of analog, digital, and basic
telephone modules. That hardware is described in the MERLIN LEGEND sys-
tem documentation and will not be repeated. However, for CMS to work with
the MERLIN LEGEND system, a certain hardware configuration is required:
System programming console or PC (running SPM) for programming
the MERLIN LEGEND system.
Two analog modules with at least three DLC operator positions avail-
able for the CMS PC and the CMS supervisor telephone.
Analog or digital station modules for agent telephones. (Agent tele-
phones cannot be connected to basic telephone modules.)
Loop-start and/or ground-start lines for all CMS lines/trunks. Accept-
able modules for CMS lines/trunks include: 408 ATL, 408 ATL GS/LS,
400 LS, 800 LS, 800 GS/LS, 400 GS/LS.
T1 trunk channels set to loop-start. T1 trunks and ISDN PRI use
MERLIN LEGEND module 100 DS1.
A basic telephone module (012) for Transfer-to-Queue loop-backs.

CMS Hardware-Required

Table 2-1 lists the hardware required specifically for CMS. Where multiple
pieces of equipment appear in the Description column, any one listed is
acceptable.
Hardware Requirements
2-2