Single Renumbering - AT&T Call Management System Installation And Programming Manual

Programming the MERLIN LEGEND System for CMS
4. Enter the new 2-digit, 3-
digit, or 4-digit extension
number for the first
extension in the block.
This number cannot
overlap any of the pre-
assigned line, extension,
or adjunct numbers.
Exit to System Programming
5.

Single Renumbering

Follow the steps below to renumber a single extension. Refer to Form 2a for
the new extension numbers.
IMPORTANT
In steps 3 and 4 below, enter 2-digit, 3-digit, or 4-digit extension
numbers depending on the numbering scheme selected in the previous
procedure. For example, use 4-digit extensions if you selected Set Up
Space.
Step
1. Display Single Renumber
screen
Select Extensions
2.
Enter the 2-digit, 3-digit,
3.
or
4-digit extension
number for the exten-
sion.
Dial extension
Enter
Exit
Exit
MLX-20L
SysRenumber
Single
Extensions
Dial extension
Enter
Setting Basic System Operating Conditions
Type extension
[F10]
[F5]
[F5]
PC
[F2]
[F2]
[F2]
Type extension
[F10]
1-7