Turning Intraflow On/Off (Optional) - AT&T Call Management System Installation And Programming Manual

Building a Shift Configuration
2. Enter the information for a line group. If no secondary split is identified,
type a hyphen in that field.
3. Press [F8] (Enter Data) to save the data.
The prompt disappears, the screen's function keys replace the editing function
keys, and the information you entered appears on the screen.
4. Repeat steps 1 through 3 for each line group.

Turning Intraflow On/Off (Optional)

The initial setting for intraflow is off for each line group. To turn intraflow on
for a particular line group:
1. Press [F2] (Flow On/Off).
The editing function keys replace the screen's function keys, and the following
prompt appears on the prompt line:
CHANGE INTRAFLOW :
2. Enter a line group letter.
Press [F8] (Enter Data) to save the entry.
3.
The prompt disappears, the screen's function keys replace the editing function
keys, and the intraflow designation on the screen for that line group changes
from Off to On.
4. Repeat steps 1 through 3 for each line group.
Line Group Letter: _
Programming Call Flow
6-11