Set Cms Supervisor To No Ring - AT&T Call Management System Installation And Programming Manual

Programming the MERLIN LEGEND System for CMS
3. Enter the CU1 extension
and save entry
4.
Enter the CU2 extension
and save entry
5. Exit to System Program-
ming

Set CMS Supervisor to No Ring

Although the CMS supervisor should have access to all CMS lines or trunks,
they should not ring at the telephone. To prevent the lines from ringing, set
the supervisor's console to No Ring. This programming affects all lines/
trunks—even non-CMS lines—assigned to line buttons on the telephone.
Step
1.
Display Station Program-
ming screen
2.
Enter CMS supervisor
extension number
3. Select a CMS line button
and enter No Ring
feature code
4. Exit
NOTE:
When the fallback plan is started, the lines on the CMS supervisor telephone
must be set to Immediate Ring. The fallback plan will not work if the lines are
set to No Ring. The code for Immediate Ring is
Setting Up the Operator Positions
1-18
Dial number
Enter
Dial number
Enter
Exit
Exit
Exit
MLX-20L
More
Cntrl Prog
Dial number
Enter
Start
Press line but-
ton
3
4 5
*
[ Top Sys Prog ]
*
Type number
[F10]
Type number
[F10]
[F5]
[F5]
[F5]
PC
[PgUp]
[F4]
Type number
[F10]
[F10]
Press a line
button
4
* 3 5
[Alt] +
C
3
4 .
7