Rip General Configuration - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Reference Manual

The following table describes the RIP Route Redistribution Configuration controls:
RIP Route Redistribution Configuration controls
Table 161
Control
Metric (1-15, 0 = none)
Route Maps Available
Out Route Map List

RIP General Configuration

To display the following form, select Layer 3 > Routing Information Protocol > General.
The following table describes the RIP Interface Configuration controls:
RIP General Configuration controls
Table 162
Control
Globally Enable RIP?
Update Period (1-120 sec)
Descriptions
Exports the routes of this protocol in which the metric and metric type are specified.
To remove a previous configuration and stop exporting the routes of the protocol,
enter 0 (none).
Lists the route maps that can be added to the list of OSPF static route.
Lists the route maps that are members of the RIP route.
Select a route map number in the Route Maps Available list and click Add to add
the route map to the list of RIP Redistribution routes.
Select a route map number in the Out Route Map list and click Remove to remove
the route map from the list of RIP Redistribution routes.
Descriptions
Globally enables or disables RIP.
Configures the time interval for sending for RIP table updates, in seconds.
The default value is 30 seconds.
Configuring the switch
227