Managing The System Clock - 3Com 3C63400-3AC-C - PathBuilder S700 Switch Reference Manual

Managing the System
Clock
Figure 73 General System Information Menu
You can manage the system clock for the PathBuilder S700 in the following ways:
Specify the clock sources to be used for system timing. You can set up to eight
n
priority clock sources, including multiple ports of the same card,
Specify the clock mode: revertive or non-revertive
n
(revertive mode only) Set the revertive time—the length of time the system
n
monitors the highest priority system clock source before either reverting to it (if
it has become operative) or continuing to use a lower priority clock source.
To manage the system clock, follow these steps:
1 From the System Administration menu, select [4] Manage System Clock to display
the System Clock Configuration menu, shown in Figure 74.
Figure 74 System Clock Configuration Menu
Viewing and Configuring System Information 107