Ce Notice - 3Com 3C63400-3AC-C - PathBuilder S700 Switch Reference Manual

CE Notice

Marking by the symbol CE indicates compliance of the equipment with the
EMC, Telecom and Low Voltage directives of the European Community. Such
marking is indicative that this equipment meets or exceeds the following
technical standards.
EN55022—Limits and methods of measurement of radio interference
characteristics of information technology equipment.
EN50082-1—Electromagnetic compatibility - generic immunity standard part 1:
residential, commercial, and light industrial.
CTR 12—Connection of 2 Mbit/s Unstructured Leased Lines.
CTR13—Connection to 2 Mbit/s Structured Leased Lines.
EN 60950—Safety of Information Technology Equipment including Electrical
Business Equipment.
EN 41003—Particular safety requirements for electrical equipment to be
connected to Telecom networks.
WARNING: This customer equipment is to be installed and maintained by
service personnel as defined by AS/NZS 3260 clause 1.2.14.3. (Service
Personnel). Incorrect connection of connected equipment to the General
Purpose Outlet could result in a hazardous situation.
WARNING: Safety requirements are not fulfilled unless the equipment is
connected to a wall socket outlet with protective earth contact.