Fcc Part 68 Statement - 3Com 3C63400-3AC-C - PathBuilder S700 Switch Reference Manual

xii C : S
HAPTER UPPLEMENTARY

FCC Part 68 Statement

R I
EGULATORY NFORMATION
Clearance (distance X in the figure below) is defined as the shortest distance
between two conductive parts, or between the conductive part and the bonding
surface of the equipment, measured through air.
Creepage (distance Y in the figure below) is defined as the shortest path
between two conductive parts, or between the conductive part and the bonding
surface of the equipment, measured along the surface of the insulation.
Components
Interface Module
This equipment complies with Part 68 of the Federal Communications
Commission (FCC) rules. On the product is a label that contains the FCC
registration number for this device. If requested, you must provide this
information to the telephone company.
This equipment is designed to be connected to the telephone network or
premises wiring using a compatible modular jack which is Part 68 compliant.
See installation instructions for details.
If this device causes harm to the telephone network, the telephone company
will notify you in advance that temporary discontinuance of service may be
required. The telephone company may request that you disconnect the
equipment until the problem is resolved.
The telephone company may make changes in its facilities, equipment,
operations, or procedures that could affect the operation of this equipment. If
this happens, the telephone company will provide advance notice in order for
you to make necessary modifications to maintain uninterrupted service.
If you experience trouble with this equipment or for repair or warranty
information, please follow the applicable procedures explained in the Technical
Support section of this manual (Appendix A).
Y
X
Adjacent Card
Host Chassis