Table of Contents
Advertisement
Viewing and/or
Modifying Existing
Virtual Interfaces
1 From the List Card menu, enter the slot number corresponding to the card for
2 Select the Virtual Interfaces option to display the Virtual Interfaces Configuration
3 Select [1] List/Modify Virtual Interface to open the List/Modify Virtual Interface
4 If you want to modify a virtual interface, enter the number corresponding to the
5 Change the Shaper Rate and/or Description for the virtual interface as desired.
Once a Virtual Interface has been established, you can modify the values for
Shaper Rate or Description.
To view and/or modify an existing virtual interface, follow these steps:
which you want to view and/or modify a virtual interface. The configuration menu
for that card appears.
menu. Figure 84, above, shows the MCPU Virtual Interfaces Configuration menu.
The menus for the other cards are the same.
menu. Figure 87 shows the MCPU List/Modify Virtual Interface menu. The menus
for the other cards are the same.
The List/Modify Virtual Interface menu shows a summary of existing virtual
interfaces, with a virtual interface number (VI#) assigned to each. The menu also
displays the following information for each virtual interface:
Rate, in cells per second
n
User-entered description
n
Figure 87 List/Modify Virtual Interface Menu
virtual interface which you want to modify to display the Modify Virtual Interface
menu for the selected virtual interface. This menu is the same as the Add Virtual
Interface menu shown earlier in Figure 86.
Configuring Virtual Interfaces
125
Advertisement
Table of Contents
