Connecting a QSIM
V.35/RS422/EIA530
Module
The QSIM (Quad Serial Interface Module) provides the following cabling options:
DTE/DCE V.35
n
DTE/DCE EIA530
n
DTE/DCE RS-422
n
DTE/DCE X.21
n
To connect the QSIM, attach the appropriate cable to one of the four ports using
the 60-pin amphenol connector, as shown in Figure 17.
Figure 17 QSIM Connection
Table 10, Table 11, Table 12, Table 13, Table 14, Table 15, Table 16, Table 18, and
Table 17 describe the connector pinouts
Step 4: Connect I/O Cabling and Wiring
V.35
EIA530
RS-422
Router
33