Specifications - 3Com 3C63400-3AC-C - PathBuilder S700 Switch Reference Manual

8 C 1: S
HAPTER YSTEM
Specifications
D
ESCRIPTION
Table 4 lists complete specifications for the Pathbuilder S700. these specifications
are subject to change without notice.
Table 4 PathBuilder S700 System Specifications
Platform
Configuration
Power Supplies
Input Power Requirements 90-264 VAC, 50-60Hz standard grounded outlet
Power Consumption
Maximum Current
Environmental
Operating Temperature
Storage Temperature
Humidity
Altitude
Regulatory Compliance
FCC
Emissions
Safety
Physical
Shelf Dimensions
Rack Mount Width
Rack Mount Spacing
Empty Weight (Base Unit)
Unit Weight (fully loaded)
Shipping Weight
Management
Management Functions
(continued)
18 slots per shelf
Up to 6 required depending on number of application modules
installed (load sharing configuration)
-42 to -60 VDC, optional
10 AWG wire, Belden type 19364
1250 Watts, maximum
10.0 A @ 110 VAC
5.0 A @ 220 VAC
20.0 A @ -48 VDC
0 to 45ºC
-40 to 70ºC
95% @ 40ºC (noncondensing)
14,000 ft. or 4,300 meters
FCC Part 15 rules for a Class A computing device
FCC Part 68
EN55022
EN50082-1
CTR 12
CTR 13
Austel TS-001
Austel AS 3260
UL listed (UL 1950 and 1459)
VDE/TUV (EN 60950)
EN41003
CSA 22.2
Austel AS/NZS35-48
22.75" x 19" x 11.81" (H x W x D)
(57.8 cm x 48.3 cm x 30 cm)
19" (48.3 cm) or
23" (58.4 cm) optional
13 RMU
62 lbs (28.1 kg)
95 lbs (43.1 kg)
100 lbs (45.4 kg)
In-band SNMP (See "Configuring In-band Management" in
Chapter 3 for details.)
Dual flash memory (image and configuration) TCP/IP stack (TFTP,
ping, Telnet)