Configuring The Client For Scanning; Installing The Network Scanner Utility; Required Environment - Xerox DocuColor 2240 User Manual

U G ( S )
S E R U I D E C A N

Configuring the Client for Scanning

Installing the Network Scanner Utility

Required Environment

Target Operating System
Client Workstation
Network
Target Application
Software
3 – 3 0
You need to install the scanner driver on your client workstation to
retrieve scanned documents directly from the Printer's Mailboxes
into an image editing application.
Network Scanner Utility allows you to access stored data in the
mailbox from a client. This section describes the installation and
uninstallation of the Network Scanner Utility using the Driver/
Network Utility CD.
To install Network Scanner Utility, a client must meet the following
requirements:
• Microsoft Windows 95/98/ME
• Microsoft Windows NT version 4.0/2000/XP
NOTE: Windows NT Server TSE (Terminal Server Edition) and
Windows 2000 Server/Advanced Server Terminal Service are not
compatible with this feature.
• i486DX4/100 MHz processor or above (Pentium 100 MHz or
above is recommended.
• 32 MB memory.
• 40 MB or more of free hard disk space (not including space for
scanned data).
A client must be connected to a network and be able to
communicate with the TCP/IP protocol.
To import the data stored in the mailbox to application software,
the software must be compatible with the TWAIN interface.