When The Completion Of The Job Is Not Notified; Tcp/Ip; Troubleshooting; When Using Windows 95, Windows 98, Or Windows Me - Xerox 4590 System Administration Manual

9. Tr ou b le s h oo ti n g
Cause
The Notify option is not specified
when the computer transmitted
the print data.
Netware command CASTOFF
has been issued on the computer.

TCP/IP

Troubleshooting

Cause
The machine is connected to the
different network from the computer.
A connection cannot be established
due to a problem on the network
between the computer and the
machine.
The power on the machine was
switched off after the computer
instructed a print job.Or, the computer
instructed a print job while the machine
is switched off.
9- 1 0

When the completion of the job is not notified

Check point
Confirm if the Notify option is
specified when transmitting the
print data.
Not applicable
This section describes the troubleshooting, notes, and restrictions
when using TCP/IP.
The possible causes, check points, and remedies for problems
when using TCP/IP (LPD) are as follows:

When using Windows 95, Windows 98, or Windows Me

Status
display
Check point Confirm with your network system administrator if a
Remedy
Status
display
Check point Not applicable
Remedy
Status
display
Check point Check if the machine is on.
Remedy
Xe r o x 45 90 / 4110 Co p ie r / P r in t er S y s te m Ad m i ni s t r at i on G ui d e
Specify the Notify option when
transmitting the print data.
Issue the NetWare command
CASTON on the computer.
Status display / check point / remedy
Print job failed (Network Error)
router or a gateway is present between the networks
where the computer and the machine are
connected.
Connect the machine to the network where the
computer is connected.
Print job failed (Network Error)
Request your network system administrator to
investigate the problem.
Print job failed (Network Error)
Switch the machine on.
Remedy