clear hw-module slot password
clear hw-module slot password
To clear the password on an intelligent line module, use the clear hw-module slot password command:
Syntax Description
slot_num
Defaults
The password is not cleared.
Command Modes
Privileged EXEC
Command History
Release
12.2(18)EW
Usage Guidelines
You only need to change the password once unless the password is reset.
Examples
This example shows how to clear the password from slot 5 on a line module:
Switch# clear hw-module slot 5 password
Switch#
Related Commands
hw-module power
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-22
clear hw-module slot slot_num password
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter2
Cisco IOS Commands for the Catalyst 4500 Series Switches
(Optional) Specifies a slot on a line module.
78-16201-01