Show Module - Cisco 4500M Command Reference Manual

Command reference
Hide thumbs Also See for 4500M:
Table of Contents

Advertisement

show module

show module
To display module information, use the show module command.
Syntax Description
mod
all
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History
Release
12.1(8a)EW
Usage Guidelines
In the Mod Sub-Module fields in the command output, the show module command displays the
supervisor engine number but appends the uplink daughter card's module type and information.
If the PoE consumed by the module is more than 50 W above the adminstratively allocated PoE, the
"Status" displays as "PwrOver.". If the PoE consumed by the module is more than 50 W above the PoE
module limit., the "Status" displays as "PwrFault".
Examples
This example shows how to display information for all modules .
This example shows the show module command output for a system with inadequate power for all
installed modules. The system does not have enough power for Module 5; the "Status" displays it as
"PwrDeny".
Switch# show module all
Mod
----+-----+--------------------------------------+-----------------+-----------
1
2
3
5
6
M MAC addresses
--+--------------------------------+---+------------+----------------+---------
1 005c.9d1a.f9d0 to 005c.9d1a.f9df 0.5 12.1(11br)EW 12.1(20020313:00 Ok
2 0010.7bab.9920 to 0010.7bab.9925 0.2
3 0050.7356.2b36 to 0050.7356.2b47 1.0
5 0001.64fe.a930 to 0001.64fe.a95f 0.0
6 0050.0f10.28b0 to 0050.0f10.28df 1.0
Switch#
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-352
show module [mod | all]
(Optional) Number of the module; valid values vary from chassis to chassis.
(Optional) Displays information for all modules.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Ports Card Type
2
1000BaseX (GBIC) Supervisor(active)
6
1000BaseX (GBIC)
18
1000BaseX (GBIC)
0
Not enough power for module
48
10/100BaseTX (RJ45)
Chapter2
Cisco IOS Commands for the Catalyst 4500 Series Switches
Model
WS-X4014
WS-X4306
WS-X4418
WS-X4148-FX-MT
WS-X4148
Hw
Fw
Sw
Serial No.
JAB054109GH
00000110
JAB025104WK
00000000000
JAB023402RP
Status
Ok
Ok
PwrDeny
Ok
78-16201-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ws-c4507r4500 series

Table of Contents