Vtp Server - Cisco 4500M Command Reference Manual

vtp server

vtp server
To place the device in VTP server mode, use the vtp server command.
Syntax Description
This command has no arguments or keywords.
Defaults
Enabled
Command Modes
VLAN configuration
Command History Release
12.1(8a)EW
Usage Guidelines
If you make a change to the VTP or VLAN configuration on a switch in server mode, that change is
propagated to all the switches in the same VTP domain.
You can set VTP to either server or client mode only when you disable dynamic VLAN creation.
If the receiving switch is in server mode, the configuration is not changed.
The
error if the device is not in client mode.
Examples
This example shows how to place the device in VTP server mode:
Switch(vlan-config)# vtp server
Switch(vlan-config)#
Related Commands
show vtp
vtp (global configuration mode)
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-514
vtp server
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
vtp server command is the functional equivalent of no vtp client, except that it does not return an
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
78-16201-01