Chapter2
Cisco IOS Commands for the Catalyst 4500 Series Switches
clear interface gigabitethernet
To clear the hardware logic from a Gigabit Ethernet IEEE 802.3z interface, use the clear interface
.gigabitethernet command.
Syntax Description
slot/port
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History
Release
12.1(8a)EW
Examples
This example shows how to clear the hardware logic from a Gigabit Ethernet IEEE 802.3z interface:
Switch# clear interface gigabitethernet 1/1
Switch#
Related Commands
show interfaces status
78-16201-01
clear interface gigabitethernet slot/port
Number of the slot and port.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
clear interface gigabitethernet
2-23