Attach Module - Cisco 4500M Command Reference Manual

Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches

attach module

To remotely connect to a specific module, use the attach module configuration command.
Syntax Description
mod
Defaults
This command has no default settings.
Command Modes
Privileged
Command History Release
12.1(19)EW
Usage Guidelines
This command applies only to the Access Gateway Module on Catalyst 4500 series switches.
The valid values for mod depend on the chassis used. For example, if you have a Catalyst 4006 chassis,
valid values for the module are from 2 to 6. If you have a 4507R chassis, valid values are from 3 to 7.
When you execute the attach module mod command, the prompt changes to Gateway#.
This command is identical in the resulting action to the session module mod and the remote login
module mod commands.
Examples
This example shows how to remotely log in to an Access Gateway Module:
Switch# attach module 5
Attaching console to module 5
Type 'exit' at the remote prompt to end the session
Gateway>
Related Commands
remote login module
session module
78-16201-01
attach module mod
Target module for the command.
Modification
This command was first introduced.
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
attach module
2-9