Debug Platform Packet Protocol Pagp - Cisco 4500M Command Reference Manual

Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches

debug platform packet protocol pagp

To debug PAgP protocol packets, use the debug platform packet protocol lacp command. To disable
debugging output, use the no form of this command.
Syntax Description
receive
transmit
vlan
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(13)EW
Examples
This example shows how to enable all PM debugging:
Switch# debug platform packet protocol pagp
Switch#
Related Commands
undebug platform packet protocol pagp (same as no debug platform packet protocol pagp)
78-16201-01
debug platform packet protocol pagp [receive | transmit | vlan]
no debug platform packet protocol pagp [receive | transmit | vlan]
Enables platform packet reception debugging functions.
Enables platform packet transmission debugging functions.
Enables platform packet VLAN debugging functions.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
debug platform packet protocol pagp
2-61