Chapter2
Cisco IOS Commands for the Catalyst 4500 Series Switches
show interfaces counters
To display traffic on the physical interface, use the show interfaces counters command.
Syntax Description
all
detail
errors
storm-control
trunk
module mod
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History
Release
12.1(8a)EW
12.1(19)EW
12.2(18)EW
Usage Guidelines
If you do not enter any keywords, all counters for all modules are displayed.
The display for the storm-control keyword includes suppressed multicast bytes.
Examples
This example shows how to display error counters for a specific module:
Switch# show interfaces counters errors module 1
Port
Gi1/1
Gi1/2
Port
Gi1/1
Gi1/2
Switch#
78-16201-01
show interfaces counters [all | detail | errors | storm-control | trunk] [module mod ]
(Optional) Displays all interface counters including errors, trunk, and detail.
(Optional) Displays detailed interface counters.
(Optional) Displays interface error counters.
(Optional) Displays the number of packets discarded due to suppression on the
interface.
(Optional) Displays interface trunk counters.
(Optional) Limits the display to interfaces on a specific module.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Support for storm control.
Support for the display of total suppression discards.
Align-Err
FCS-Err
0
0
Single-Col Multi-Col
0
0
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
Xmit-Err
Rcv-Err UnderSize
0
0
0
0
Late-Col Excess-Col Carri-Sen
0
0
0
0
0
0
show interfaces counters
0
0
0
0
Runts
Giants
0
0
0
0
0
0
2-279