Debug Ip Dhcp Snooping Packet - Cisco 4500M Command Reference Manual

debug ip dhcp snooping packet

debug ip dhcp snooping packet
To debug DHCP snooping messages, use the debug ip dhcp snooping packet command. To disable
debugging output, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults
Debugging of snooping packet is disabled.
Command Modes
Privileged EXEC
Command History Release
12.1(12c)EW
Examples
This example shows how to enable debugging for DHCP snooping packets:
Switch# debug ip dhcp snooping packet
Switch#
This example shows how to disable debugging for DHCP snooping packets:
Switch# no debug ip dhcp snooping packet
Switch#
Related Commands
debug ip dhcp snooping event
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-54
debug ip dhcp snooping packet
no debug ip dhcp snooping packet
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
78-16201-01