Redundancy Reload - Cisco 4500M Command Reference Manual

Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches

redundancy reload

To force a reload of one or both supervisor engines, use the redundancy reload command.
Syntax Description
peer
shelf
Defaults
This command has no default settings.
Command Modes
EXEC
Command History Release
12.1(12c)EW
Usage Guidelines
Before using this command, refer to the "Performing a Software Upgrade" section of the Catalyst4500
Series Switch Cisco IOS Software Configuration Guide for additional information.
The redundancy reload shelf command conducts a reboot of both supervisor engines. The modules are
reset.
Examples
This example shows how to manually reload one or both supervisor engines:
Switch# redundancy reload shelf
Switch#
Related Commands
redundancy
show redundancy
78-16201-01
redundancy reload {peer | shelf}
Reloads the peer unit.
Reboots both supervisor engines.
Modification
Support for this command was introduced on the Catalyst 4500 series switch
(Catalyst 4507R only.)
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
redundancy reload
2-229