Define Interface-Range - Cisco 4500M Command Reference Manual

Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches

define interface-range

To create a macro of interfaces, use the define interface-range command.
Syntax Description
macro-name
interface-range
Defaults
This command has no default settings.
Command Modes
Global configuration
Command History Release
12.1(8a)EW
Usage Guidelines
The macro name is a character string of up to 32 characters.
A macro can contain up to five ranges. An interface range cannot span modules.
When entering the interface-range, use these formats:
•
•
Valid values for interface-type are as follows:
•
•
•
Examples
This example shows how to create a multiple-interface macro:
Switch(config)# define interface-range macro1 gigabitethernet 4/1-6, fastethernet 2/1-5
Switch(config)#
Related Commands
interface range
78-16201-01
define interface-range macro-name interface-range
Name of the interface range macro; up to 32 characters.
List of valid ranges when specifying interfaces; see "Usage Guidelines."
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
interface-type {mod}/{first-interface} - {last-interface}
interface-type {mod}/{first-interface} - {last-interface}
FastEthernet
GigabitEthernet
Vlan vlan_id
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
define interface-range
2-77