Show Ip Igmp Snooping Vlan - Cisco 4500M Command Reference Manual

Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches

show ip igmp snooping vlan

To display information on dynamically learned and manually configured VLAN switch interfaces, use
the show ip igmp snooping vlan command.
Syntax Description
vlan_num
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(8a)EW
12.1(12c)EW
Usage Guidelines
You can also use the
address table for a VLAN that has IGMP snooping enabled.
Examples
This example shows how to display snooping information for a specific VLAN:
Switch# show ip igmp snooping vlan 2
vlan 2
----------
IGMP snooping is globally enabled
IGMP snooping TCN solicit query is globally enabled
IGMP snooping global TCN flood query count is 2
IGMP snooping is enabled on this Vlan
IGMP snooping immediate-leave is disabled on this Vlan
IGMP snooping mrouter learn mode is pim-dvmrp on this Vlan
IGMP snooping is running in IGMP_ONLY mode on this Vlan
Switch#
Related Commands
ip igmp snooping
ip igmp snooping vlan immediate-leave
ip igmp snooping vlan mrouter
ip igmp snooping vlan static
show ip igmp interface
show ip igmp snooping mrouter
show mac-address-table multicast
78-16201-01
show ip igmp snooping vlan vlan_num
Number of the VLAN; valid values are from 1 to 1001 and from 1006 to 4094.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Support for extended addressing was added.
show mac-address-table multicast
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
show ip igmp snooping vlan
command to display entries in the MAC
2-315