Cisco 4500M Command Reference Manual page 298

show etherchannel
Flags:
Timers: H - Hello timer is running.
<...output truncated...>
Switch#
This example shows how to display the protocol enabled:
Switch# show etherchannel protocol
Group: 12
----------
Protocol:
Group: 24
----------
Protocol:
Switch#
Related Commands
channel-group
interface port-channel
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-266
S - Device is sending Slow hello.
A - Device is in Auto mode.
S - Switching timer is running.
Channel-group listing:
-----------------------
PAgP
- (Mode ON)
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
C - Device is in Consistent state.
P - Device learns on physical port.
Q - Quit timer is running.
I - Interface timer is running.
78-16201-01