Show Mac-Address-Table Aging-Time - Cisco 4500M Command Reference Manual

show mac-address-table aging-time

show mac-address-table aging-time
To display the MAC address aging time, use the show mac-address-table aging-time command.
Syntax Description
vlan vlan_id
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(8a)EW
12.1(12c)EW
Examples
This example shows how to display the currently configured aging time for all VLANs:
Switch# show mac-address-table aging-time
Vlan
----
100
200
Switch#
This example shows how to display the currently configured aging time for a specific VLAN:
Switch# show mac-address-table aging-time vlan 100
Vlan
----
100
Switch#
Related Commands
show mac-address-table address
show mac-address-table count
show mac-address-table dynamic
show mac-address-table interface
show mac-address-table multicast
show mac-address-table protocol
show mac-address-table static
show mac-address-table vlan
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-338
show mac-address-table aging-time [vlan vlan_id]
(Optional) Specifies a VLAN; valid values are from 1 to 4094.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Support for extended addressing was added.
Aging Time
----------
300
1000
Aging Time
----------
300
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
78-16201-01