Clear Lacp Counters - Cisco 4500M Command Reference Manual

Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches

clear lacp counters

To clear statistics for all interfaces belonging to a specific channel group, use the clear lacp counters
command.
Syntax Description
channel-group
Defaults
This command has no default settings.
Command Modes
Privileged EXEC mode
Command History Release
12.1(13)EW
Usage Guidelines
This command is not supported on systems configured with a Supervisor Engine 1.
If you do not specify a channel group, all channel groups are cleared.
If you enter this command for a channel group that contains members in PAgP mode, the command is
ignored.
Examples
This example shows how to clear the statistics for a specific group:
Switch# clear lacp 1 counters
Switch#
Related Commands
show lacp
78-16201-01
clear lacp [channel-group] counters
(Optional) Channel group number; valid values are from 1 to 64.
Modification
Support for this command was introduced on the Catalyst4500 series switches.
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
clear lacp counters
2-35