Ip Dhcp Snooping Information Option - Cisco 4500M Command Reference Manual

ip dhcp snooping information option

ip dhcp snooping information option
To enable DHCP option 82 data insertion, use the ip dhcp snooping information option command. To
disable DHCP option 82 data insertion, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults
DHCP option 82 data insertion is enabled.
Command Modes
Global configuration
Command History Release
12.1(12c)EW
Examples
This example shows how to enable DHCP option 82 data insertion:
Switch(config)# ip dhcp snooping information option
Switch(config)#
This example shows how to disable DHCP option 82 data insertion:
Switch(config)# no ip dhcp snooping information option
Switch(config)#
Related Commands
ip dhcp snooping
ip dhcp snooping limit rate
ip dhcp snooping trust
ip dhcp snooping vlan
show ip dhcp snooping
show ip dhcp snooping binding
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-128
ip dhcp snooping information option
no ip dhcp snooping information option
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
78-16201-01