Show Mac-Address-Table Count - Cisco 4500M Command Reference Manual

Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches

show mac-address-table count

To display the number of entries currently in the MAC address table, use the show mac-address-table
count command.
Syntax Description
vlan vlan_id
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(8a)EW
12.1(12c)EW
Examples
This example shows how to display the entry count for a specific VLAN:
Switch# show mac-address-table count vlan 1
MAC Entries for Vlan 1:
Dynamic Unicast Address Count:
Static Unicast Address (User-defined) Count:
Static Unicast Address (System-defined) Count: 1
Total Unicast MAC Addresses In Use:
Total Unicast MAC Addresses Available:
Multicast MAC Address Count:
Total Multicast MAC Addresses Available:
Switch#
Related Commands
show mac-address-table address
show mac-address-table aging-time
show mac-address-table dynamic
show mac-address-table interface
show mac-address-table multicast
show mac-address-table protocol
show mac-address-table static
show mac-address-table vlan
78-16201-01
show mac-address-table count [vlan vlan_id]
(Optional) Specifies a VLAN; valid values are from 1 to 4094.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Added support for extended VLAN addresses.
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
show mac-address-table count
0
0
1
32768
1
16384
2-339