Cabletron Systems 9A656-04 Configuration Manual page 99

You can specify the arp command without options, or with one of the following options:
Options:
Example:
bridge:
The bridge command does not apply to the 9A686-04.
NOTE
Syntax:
Description:
9A656-04/9A686-04 Configuration Guide
-a View cache data
-d Delete an IP address entry. Requires additional arguments:
<Interface Number> <IP address>
-s Adds a static entry. Requires additional arguments: <Interface
Number> <IP address> <MAC address>
-f Flush the ARP cache
NetTools-> arp -a
# Interface Network Address
# (SonicInt) 122.144.40.111
# (SonicInt) 122.144.48.109
# (SonicInt) 122.144.52.68
# (SonicInt) 122.144.21.43
NetTools-> arp -d 1 122.144.52.68
NetTools-> arp -s 1 22.44.2.3 00:00:0e:03:1d:3c
NetTools-> arp -f
bridge [ENABLE/DISABLE] [IFNUM/ALL]
The bridge command allows bridge management to be enabled
or disabled at the user's request, either one at a time or all at
once. Specifying a single interface number will affect the
bridging status of that interface, while specifying ALL will
affect every interface.
Network Tools
Media Type
Physical Address
3(dynamic)
00.00.0e.12.3c.04
3(dynamic)
00.00.0e.f3.3d.14
3(dynamic)
00.00.0e.12.3c.04
3(dynamic)
00.00.0e.03.1d.3c
051467
2-69