Cabletron Systems 9A656-04 Configuration Manual page 101

netstat:
Syntax:
Description:
Options:
Example:
NetTools-> netstat -i
Interface + Description
# 1 (ethernet -csmacd)
# 2 (ethernet - csmacd)
# 3 (ethernet - csmacd)
# 4 (ethernet - csmacd)
NetTools-> netstat -r
Destination
# Default Route
# 134.141.0.0
# 134.141.0.0
ping:
Syntax:
Description:
Options:
Example:
9A656-04/9A686-04 Configuration Guide
netstat [option]
The netstat command provides a display of general network
statistics for the managed device. The netstat command must be
used with one of the two display options.
-i Displays status and capability information for each interface
-r Displays routing information for each interface
Speed
MTU Admin
10000000
1514 up
10000000
1514 up
10000000
1514 up
10000000
1514 up
Next-hop
DirectConnection
DirectConnection
DirectConnection
ping [IP address]
The ping command generates an outbound ping request to check
the status (alive/not alive) of a device at a specified IP address.
Not Applicable
NetTools-> ping 122.144.40.10
122.144.40.10 is alive
Oper MAC Addr
up 0x00 0x00 0x1d 0x07 0x50 0x0e
up 0x00 0x00 0x1d 0x07 0x50 0x0f
up 0x00 0x00 0x1d 0x07 0x50 0x10
0x00 0x00 0x1d 0x07 0x50 0x11
up
Interface
1
2
3
Network Tools
051470
051471
2-71