Cabletron Systems 9A656-04 Configuration Manual page 46

Chapter 2: System Configuration
PS1 Input Pwr
Displays the total input power of power supply one.
PS1 Output Pwr (Read-only)
Displays the total output power of power supply one.
PS1 FW Revision (Read-only)
Displays the firmware revision of power supply one.
PS1 HW Revision (Read-only)
Displays the hardware revision of power supply one.
PS1 SN (Read-only)
Displays the serial number of power supply one.
PS1 Temp (Read-only)
Displays the current temperature of power supply one in both Fahrenheit and Centigrade. This
is followed by a general temperature condition in relation to the Fahrenheit and Centigrade
values.
PS1 Fan Speed (Read-only)
Displays the percentage of capacity at which the power supply fans are currently operating.
PS1 (Command)
This command allows the Power Supply Specific Section of the Chassis Power screen to
display the current values for power supply one. To use this command use the arrow keys to
highlight the PS1 command and press ENTER. The Power Supply Specific Section of the
screen displays the values for power supply one.
PS2 (Command)
This command allows the Power Supply Specific Section of the Chassis Power screen to
display the current values for power supply two. To use this command use the arrow keys to
highlight the PS2 command and press ENTER. The Power Supply Specific Section of the
screen displays the values for power supply two.
2-16 9A656-04/9A686-04 Configuration Guide