Cabletron Systems 9A656-04 Configuration Manual page 25

Configurable Options
Environmental Module Configuration
Local Management provides access to the Environmental Module screen. This screen allows
the user to view current operating conditions of the Environmental Module (EM), configure
the COM ports of the EM, and download a new firmware image for the EM to FLASH
memory.
ILMI Configuration
The ILMI Configuration screen allows the user to set the minimum value for Virtual Channel
identifiers (VCIs) for front panel and backplane Switched Virtual Connections (SVCs), the
maximum value for Virtual Path Identifiers (VPIs) for SVCs, and the maximum value for
Virtual Path Identifiers (VPIs) for Switched Virtual Path Connections (SVPCs) for the entire
system (SmartSwitch 9500 chassis).
PNNI Configuration
The PNNI Configuration screen allows the user to set the NSAP prefix and PNNI level of the
SmartSwitch 9500 chassis. When these settings are saved, each 9A686-04 installed in the
chassis share the same NSAP prefix, and the same PNNI level.
ATM Diagnostics
The SmartSwitch 9500 chassis can be set to run ATM diagnostics when power is cycled or the
modules are reset. All major hardware subsystems of the system are tested during the power
up diagnostics.
9A656-04/9A686-04 Configuration Guide Page 1-11