Additional Default Settings - Cabletron Systems 9A656-04 Configuration Manual

1.5.2 Additional Default Settings

The 9A686-04 also has the following additional default settings upon first initialization.
• A maximum of 128 k connections are allowed.
• Bandwidth is given to any requested connection on a first come, first served basis (i.e., no
Quality of Service (QoS) is given precedence to any particular request).
• ILMI sets the minimum and maximum VCI and VPI values for SVCs, and PVCs or SVPCs,
to the settings shown in
SVC only switch.
PVCs. Table 1-3
Table 1-2 Default Minimum and Maximum VCI and VPI Values for SVCs and VPCs
Minimum VCI for SVCs
Maximum VPI for SVCs
Maximum VPI for VPCs
Table 1-3 Minimum and Maximum VCI and VPI Ranges
Type
VCI for SVCs
Maximum VPI for SVCs
Maximum VPI for VPCs
• The 9A686-04 is set to be in Clock Recovery Mode, which means that all clocking will be
recovered from the received signals.
9A656-04/9A686-04 Configuration Guide
Table 1-2. With this default setting, the SmartSwitch 9500 is an
Chapter 3 provides information on how to reserve VPI/VCI ranges for
provides the total available ranges for all VCI and VPIs.
Default Settings Upon First Initialization
33
4095
4095
Minimum Value Maximum Value
33 16k
0 4095
0 4095
Page 1-9