Entering A New Screen Update Time - Cabletron Systems 9A656-04 Configuration Manual

Chapter 2: System Configuration
Upon saving the new chassis time, all 9A686-04 modules installed in the chassis
NOTE
recognize the new value as the current time.

2.6.4 Entering a New Screen Update Time

The screen update time is set from 3 to 99 seconds, with a default of 3 seconds. To set a new
screen update time, perform the following steps:
1. Use the arrow keys to highlight the Screen Update Time field.
2. Enter a number from 3 to 99.
3. Press ENTER to set the update time to the time entered in the input field.
4. Use the arrow keys to highlight the SAVE command at the bottom of the screen and press
ENTER.
If the time entered is within the 3 to 99 seconds range, the Event Message Line at the top
of the screen displays "SAVED OK". If the entry is not valid, Local Management does not
alter the current setting, but it does refresh the Screen Update Time field with the previous
value.
2-10 9A656-04/9A686-04 Configuration Guide