Paprtypemismatch; The Paper Is Too Small - Canon ImagePrograf iPF840 series Basic Manual

PaprTypeMismatch

PaprTypeMismatch
PaprTypeMismatch
Cause
When Detect Mismatch in the Control
Panel menu is set to Pause, the type of
paper loaded does not match the type
specified in the printer driver.

The paper is too small.

The paper is too small.
When Detect Mismatch in the Control
Panel menu is set to Pause or Hold Job,
paper smaller than the size specified in the
printer driver is loaded.
When Detect Mismatch in the Control
Panel menu is set to Warning, paper small-
er than the size specified in the printer driv-
er is loaded.
The paper is too small.
The paper is too small.
"Replace paper with A4/LTR (vertical) or larger"
The loaded paper is too small.
(When you have attempted to print a test
print sheet or other printer status informa-
tion.)
126
Follow these steps to ensure the paper type matches on the printer and in the printer
driver.
1.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2.
Change the paper type setting in the printer driver to the type loaded in the printer
and try printing again.
Follow these steps to ensure the paper type matches on the printer and in the printer
driver.
1.
Press ▲ or ▼ to select Change Paper, and then press the OK button.
2.
Replace the loaded paper with paper of the type and size you have specified in the
printer driver.
(See "Loading and Printing on Rolls.")
(See "Loading and Printing on Sheets.")
Press ▲ or ▼ to select Print, and then press the OK button to resume printing.
However, note that this error may cause paper jams and affect the printing quality.
Cause
Press ▲ or ▼ to select Print, and then press the OK button to resume printing.
However, note that this error may cause paper jams and affect the printing quality.
Adjust the paper size setting in the printer driver to match the size loaded in the print-
er as follows.
1.
2.
Replace the loaded paper with paper of a size that matches the size setting in the
printer driver as follows.
1.
2.
You can continue to print, but note that this error may cause problems in the printing
results.
Cause
Replace the paper with paper of A4/Letter (vertical) size or larger as follows.
1.
2.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Change the paper size setting in the printer driver to the size loaded in the printer
and try printing again.
Press ▲ or ▼ to select Change Paper, and then press the OK button to stop
printing.
Replace the loaded paper to match the settings in the printer driver and try printing
again.
(See "Loading and Printing on Rolls.")
(See "Loading and Printing on Sheets.")
Press ▲ or ▼ to select Change Paper, press the OK button, and remove the paper.
(See "Removing Sheets.")
➔
Switch to paper A4/Letter (vertical) or larger.
(See "Loading and Printing on Sheets.")
The printer will resume printing.
Corrective Action
User's Guide
➔
User's Guide
➔
Corrective Action
User's Guide
➔
User's Guide
➔
Corrective Action
P.28
User's Guide
➔
iPF840 Series
Basic Guide