Roll Paper Cannot Be Inserted Into The Paper Feed Slot - Canon imagePROGRAF PRO-6600 Online Manual

Roll paper cannot be inserted into the Paper Feed Slot

Is the roll paper curled?
Check 1
Straighten out curls and reload the roll.
Is paper jammed in the feed slot?
Check 2
Remove the jammed paper.
Remove Jammed Roll Paper
Remove a Jammed Sheet
Check that the correct paper source has been selected.
Check 3
Tap Paper Setting Display in the touch screen menu, and then select the paper source.
The leading edge of the roll paper may not be cut properly.
Check 4
If the leading edge of the roll paper is crooked or folded, the paper may not be fed correctly. Cut the leading
edge with scissors to straighten it. If the roll paper has a printed barcode, be careful not to cut the barcode part.
Is the roll unit in Take-up mode when feeding from the roll unit?
Check 5
Select Roll unit use settings in the touch screen menu, and set it to paper feed mode.
Switching Roll Unit Modes
673